帮助中心
配方类型:
COSMETICS AND DRUGS
配方说明:
Tooth Paste
配方组成:
Mineral Oil, Heavy/0.90
Glycerol C.P./10.00
Oil of Peppermint, heavy/0.50
Soap (Coconut-Tallow)/-
Water/13.04
Soap (Sodium Stearate)/-
Sodium Lauryl Sulfoacetate/2.50
Sodium Tripolyphosphate/-
Calcium Carbonate/-
Dicalcium Phosphate/52.00
Sorbitol 70%/-
"Tegosept" M/0.10
Cellulose Gum, CMC-12HP/0.86
Saccharin Solution, 50%/0.10
Propylene Glycol/20.00
配制方法:
Mix Cellulose Gum with one-fifth of the combined humectants. Preheat water to 70-80'C, then add it to the wetted gum with rapid stirring. Add remainder of the humectants.
a When soap is used as a foaming agent, it is added to the gum solution, heating if necessary, for complete solution. Cool the entire mixture to room temperature and transfer to a Werner-Pfleiderer mixer. Add the saccharin solution, oil of peppermint, and mineral oil while mixing the gum solution.
b When synthetic detergent is used rather than soap, it is added at this point while mixing the gum solution. The abrasive is added slowly, allowing it to disperse well. After the abrasive is added, mix until the paste appears homogeneous, usually from fifteen to sixty minutes.
联系我们
咨询反馈