配方类型:

SOAPS AND CLEANERS

配方说明:

All Purpose cleaner

配方组成:

"Igepal" CO-630/5.00
"Polectron" 430/0.10-0.20
The viscosity can be altered by varying the ratio of pine oil to
"Esso" #5. For example, by changing the concentration of pine oil from
10% to 7.5% or 5%, with a corresponding increase in the content of
"Esso" #5 (i.e., 27.5% or 30%), the viscosity of the final product will
be increased. The viscosity can be controlled further by the addition of
a small amount of salt, such as sodium chloride or sodium phosphate.
The following method of blending gives the best looking product:
Blend the "Esso" #5 solvent and pine oil together; with stirring, add
the tall oil and the "Igepal": then add other ingredients, with
continued stirring.
Formula No.3 (For Hard Surface)
$d: Naphtha/30.0
Pine Oil/12.0
Sodium Tripolyphosphate/1.5
Caustic Soda/0.5
Nonionic Surfactant/3.5
Alkylaryl sulfonate/2.5
Water/50.5
Formula No.
Potassium Hydroxide/3
Tap Water/49
Sodium Trip

配制方法:

dissolve TSP in cold water, then add KOH. While agitating, add "Pamak" #1 slowly. the solution will be quite viscous---almost a gel.
Stir until all soap lumps are dissolved. Add "Neutronyx" 600 and "Super-Amide" GR. Add "Varsol" #1 slowly and stir until homogeneous.
Then add pine oil. While adding pine oil, the material will thicken at first, then become a clear yellow liquid.