Cresylic acid/3 Dry blend the VEEGUM T and Kelzan and add to the water slowly, agitating continually until smooth. Add B to A. Combine C and add to A and B. Mix until uniform. Directions for use; Apply liberally with a brush to painted metal surface. Allow to stand until old finish is loosened from surface (10 to 20 minutes). Remove old finish with scraper or steel wool. Rinse surface with water. Caution: Contains caustic. Wear rubber gloves. FORMULA No. "GAFAC" RE-610/2.50 C: Sodium hydroxide/15.00 Water/18.50 Sodium lignosulfonate/6 "Petro" 11 powder/5.0 "Nacconol"/1 Sodium metasilicate (anhydrous)/54.0 chlorobenzene/2.5 Flaked caustic soda/10.0 Soda ash/28.5 Sodium gluconate/5 Sodium hydroxide/85 A: "VEEGUM" T/0.75 "Kelzan"/0.25 Water/62.00 B: "Ultrawet" 40 SX/1.00