配方类型:

POLISH

配方说明:

Shoe Polish

配方组成:

Mineral Spirits (or mixture with gum spirits of turpentine 1:1)/65
1) Soft pastes:
Melt the solids and heat the melt to about 230-250'F., depending on the
melting point of the unoxidized polyethylene wax. If oil soluble
dyestuffs are required, add these to the wax melt before adding the
paraffin. Dilute the melt with the preheated mineral spirits to obtain a
final mixing temperature of 167'F. cool down to the required pouring
temperature, using agitation. Extremely fast cooling results in very
soft and crystalline pastes. When used for black shoe polish, the Color
Mix should be diluted with approx. 10 parts of the preheated mineral
spirits, or gum turpentine, preheated to 176'F., and added to the batch
at approximately 120'F.
2) Hard Pastes:
Melt the solids and heat to about 230-250'F. Add the unpreheated mineral
spirits as fast as possible to end up with a final mixing temperature of
about 130-140'F. A semi-pasty, very grainy product

配制方法:

Melt the "Hoechst" waxes at about 120'C. Add solvent and thin by stirring. Heat the mixture to near clarification point. Ad the plastic microcrystalline waxes and the paraffin wax. Predissolve the dispersed color base in a part of the solvent and set aside. Cool the hot wax mix by stirring after the addition of the rest of the solvent. Add the dispersed color base. Pour into tins in a cool room.