配方类型:

ADHESIVES

配方说明:

Vinyl Film to Particle Board Adhesive

配方组成:

"Acrysol" G-110/0.5
Formula No.
Saniticizer 141/2.5
"Hycar" 2600X146/50.0
"Acrysol" G-110/0.5
"Nopco" 2271/35.0
Propylene Glycol/25.0
"Hycar" 2600X138/50.0
"Hycar" 2600X138/50.0
"Hycar" 2600X146/50.0
Propylene Glycol/10.0

配制方法:

Coat the adhesives on the back, or printed, side of the vinyl sheet with a No.36 wire-wound rod. Dry in a 49'C (120'F) oven or under an infrared heating lamp until the coating becomes clear. Press the coated vinyl onto the particle board at 49'C (120'F) at 0.17 MPa (25 psi).