D: Talc (325 mesh)/1.0 Mix the items in Part A at about 80'C (176'F) and when dissolved, add teh two items in Part B maintaining the temperature. Allow to cool to 76'C (169'F), then add Part C slowly while maintaining the temperature and allowing the alcohol to condense back to the mixture. Add Part D and continue stirring until the resultant suspension is homogeneous. Slow stirring rate, allow to cool to 70-72'C (158-162'F) and pour into stick casing covering the stick with vinyl wrap. Remove air pocket by pressing down slightly on vinyl wrap. This prevents holes from forming in the stick due to entrapped air. Formula No. "Cab-O-Sil" M5/1 E: "Carbowax" 1000/5.0 Stearyl Alcohol/24 F: "Cab-O-Sil^T^M" M5/1.5 G: "Siloxane" F-222/51.5 H: Perfume/q.s. "Syncrowax" HR-C/2 Perfume/q.s. Aluminum Chlorohydrate/20-25 Stearyl Alcohol/20-25 "SF"-1202 Silicone Fluid/45-55 PPG 2 Myristyl Propionate/43 Sorbitan
配制方法:
Equipment: Use a 3-neck vessel equipped with condenser, thermometer, and overhead Lightnin Mixer. Procedure: Add A slowly with stirring to B; heat to 80'C; attain solution. Add C slowly until dissolved, maintaining temperature at 80'C. Add D and allow solution to cool to 76'C; then add E, then F. Add G and H and continue stirring until resultant suspension is homogeneous. Slow stirring rate, allow to cool to 70-72'C, pour into stick casing covering teh stick with vinyl wrap. Remove air pocket by pressing down slightly on vinyl wrap. This prevents holes from forming in the stick.