In a suitable kettle equipped with a Lightnin-type mixer, charge water, and slowly sprinkle in Veegum R. Hydrate well. Sprinkle in cellulose gum and mix for 15-20 minutes, depending upon the size of the batch and equipment used. Start heating kettle to 65-70'C and add balance of Phase A excluding triethanolamine. Bring temperature up to 70-72'C and add Phase B in order given. Pass entire batch through homomixer, or if possible, use homomixer in tank and circulate batch through colloid mill (in line). Check pigment dispersion and continue mixing until no visible color streaks show on draw down. In a separate vessel equipped with Lightnin-type agitation, combine Phase C and heat until a clear, uniform solution is achieved. maintain temperature at 72-75'C. When both phases are at proper temperature, add the triethanolamine to batch. Add Phase C to batch. Mix slowly to avoid aeration. After mixing for 15-20 minutes, cool batch to 50'C and add Phase D, then add Phase E. Continue cooling to 40'C. Submit sample