配方类型:

ELASTOMERS, POLYMERS, AND RESINS

配方说明:

Injection Molding Compound

配方组成:

Wingstay L/1.00
Dioctyl Phthalate/72.50
PVC (K=70)/97.00
Mark 308/1.00
mark 974-A/2.00
Paraplex G-62/5.00
Chemigum P612-A/33.00
Stearic Acid/0.50

配制方法:

Notes: Hardness of the compound can be adjusted by selecting the appropriate plasticizer level. For injection molding applications, Chemigum P612-A and P615-D are the most suitable polymers.
Physical Properties: Tensile---1175 psi (8.1 MPa) Elongation---460% 300% Modulus---875 psi (6.0 MPa) Hardness (Shore A)---61