配方类型:

MISCELLANEOUS

配方说明:

Eraser (Ink)

配方组成:

Titanium Dioxide/5.0
Lithopone/20.0
Fina Process Oil 2059/-
White Factice 822/50.0
Zinc Oxide/10.0
Vulcanizate Properties: Cure: 30 min at 150 C in stea
Density (mg/m^3)/1.51
Hardness, IRHD/67
Stearic Acid/2.0
Barytes/-
Mill mixing is often preferred because of the greater control it allows.
High factice levels can also cause occasional crumbling in internal
Sulfur/6.0
mixers unless care is taken. Mill rolls should be kept cool since high
MBTS/1.0
temperature may result in sticking. The following mix schedule has been
found satisfactory:
DPG/1.5
Disperse the zinc oxide in the rubber. Add stearic acid, accelerators,
sulfur, pigment, filler, and oil. Add the factice.
Pigment/as required
Erasers are generally either cured from calendered or milled sheet in
simple clamped molds in a steam pan or are extruded and then steam
cured. Press molding is also used. Molded erasers may be either
individu

配制方法: