Hydrogen Peroxide* (30% solution)/10 peroxide used, up to 20% of the 30% H2O2 solution (or the equivalent Water (Deionized or Distilled)/65 percent of a more concentrated solution) while decreasing the amount of "Pluronic" F127/25 water in the formulation. *The peroxide content may be varied by increasing the amount of hydrogen
配制方法:
cool the deionized water to 40-50'F. and place it in a mixing container. Add the Pluronic F127 slowly with good agitation and continue mixing until solution is complete, maintaining the temperature below 50'F. Add cool hydrogen peroxide solution (40-50'F.) slowly, with gentle mixing. Immediately transfer to containers and allow to slowly warm to room temperature, whereupon the liquid becomes a clear, ringing gel. An alternate procedure is to combine the cool hydrogen peroxide and the cool water followed by the addition of the F127 to the aqueous system with mixing. Maintain a 40-50'F. temperature until all the Pluronic polyol has gone into solution. Bottle immediately.
地址：山东省烟台市开发区南昌大街48号
