NaOH 100%/25 g/l Carbamate nonionic wetting agent/1 g/l Pad bath temperature should not exceed 85'F. Generally, the wet pickup should be between 70 and 80%. Recommended curing conditions are 1 min 45 seconds at 350'F. No. Nonionic detergent/1% on weight of fabric Sodium carbonate/4% on weight of fabric Sodium perborate/4% on weight of fabric Urea/50 g/l Resin, dimethylolmethoxyethyl/70 g/l THPC/250 g/l "Pyrovatex" CP/25-35 "Aerotex" resin 23 special/10.00 Nonionic wetting agent/0.05 Ammonium sulfate/60 g/l Urea/1.00 Polyethylene softener (30% solids)/2.00 Ammonium chloride/0.40 Add: Prediluted nonionic wetting agent Prediluted urea Prediluted polyethylene softener Prediluted ammonium chloride Bring up to volume. Sodium bicarbonate/30 g/l Chlorinated Paraffin/362 DiOctyl Phthalate/362 2% Sodium carboxy methyl cellulose/100 Emulsifying agent/16 Watr/600 Sodium ca
配制方法:
the liquor is applied to the fabric by padding, and any surplus is expressed by adjustment of the nip to give a desired wet "add-on" which is a direct function of the final dry "add-on". The treated fabric is then dried, and cured at 120-140'c for 2-4 min. Washing and treatment with an appropriate softening agent may then be carried out if necessary in conventional plant used for this purpose. In special circumstances the emulsion may be applied by brush or spray. For example, the hessian backing of a carpet can be flameproofed after manufacture by spraying or brushing the emulsion on to the reverse side, subsequently drying and curing. However applied, the emulsion is absorbed by the fibres, and thus a continuous surface coating of the fibre is formed.
地址：山东省烟台市开发区南昌大街48号
