The procedure for dip dyeing "Texin" parts is as follows: Add 4 parts by weight dye into 50 parts of a sulfonated oil. To this solution, add 25 parts acetone, stirring thoroughly. Finally, and 25 parts water. Heat this dispersion to 140-160'F. Immerse the "Texin" part for 30-60 seconds, depending on depth of shade desired. Remove the part, rinse with cold tap water and dry. (Stir the dye solution periodically for best dispersion.)
地址：山东省烟台市开发区南昌大街48号
