配方类型:

COATINGS

配方说明:

Primer

配方组成:

Micaceous iron oxide/500
FORMULA No.4 (White Metal Primer
THIXCIN R/7.5
24% Lead Naphthenate/10.5
Methyl alcohol/1
6% Cobalt Naphthenate/4.5
6% magnesium Naphthenate/2.7
"Asbestine"/100
Soya lecithin/1
Basic Lead Silico Chromate/1040.0
Raw Linseed Oil/312.2
Cobalt drier 6%/2
Z2 Bodied Linseed Oil/55.2
Lead drier 24%/5
Thixotropic Oil #5041 (70%)/79.0
Mineral Spirits/100.0
manganese drier 6%/2
Aluminum stearate/4
"Nuade"/6.0
Lead Naphthenate, 24%/11.3
Anti-skinning agent/1
Manganese Naphthenate, 6%/3.5
Medium oil alkyd (TT-R-266 Type III)/510
Zinc chromate/100
Water/240.0
"Tamol" 850/8.0
Cellosize QP-4400/3.0
Red Lead (97% Pb3O4)/1834.0
"Bubble Breaker" 748/5.0
Tergitol Nonionic NPX/7.0
PMA-30/0.5
UCAR Latex Additive FT/25.0
Mica, Wet Ground, 325 mesh/35.0
Rutile Titanium Dioxide/150.0
"Busan" 11 M-1/150.0
"Feal" Safflower Oil Alkyd/45.0

配制方法:

Charge the water, "Tamol," "Tergitol" NPX, PMA-30, "Bubble Breaker," UCAR Additive FT, and "Cellosize" to a Cowles Dissolver or similar high-speed mixer, and mix for several minutes. Add the pigments and stir for 20 to 30 minutes under high shear. Reduce speed and add the latex.
Mix for five minutes and add the "Feal" and driers. Thoroughly mix for five to ten minutes. It is recommended that the driers be pre-mixed with the "Feal" and allowed to stand for 24 hours.