配方类型:

METALS AND THEIR TREATMENT

配方说明:

Sensitizing Plastics for Metallizing

配方组成:

Hydrochloric acid/40 ml/l
Stannous chloride/10 g/l
The author's experience with this solution is that the concentration
of the two chemicals is of little importance so long as there is enough
HCl in the solution to keep the stannous salt from hydrolyzing, and so
long as purified chemicals and distilled or deionized water are used.
The time the part is immersed in the solution is also of little
importance, 1 to 5 minutes being standard, but longer times will give
equally satisfactory results.
The stannous fluoborate solution most used is.
FORMULA No.
Sn(BF4)2 (47%)/20 g/l
HBF4 (42%)/50 ml/l
HF (52%)/10 ml/l
Room temperature, 2 minute immersion.

配制方法:

Both of these solutions are used with and without wetting agents.
For hard-to-wet plastics such as the acrylics (which generally are roughened very little) and some of the newer plastics such as the polyimides, a wetting agent appears essential.